Last updated: 2026-10-30 · By Fix It or Replace editorial team
Maytag Dryer Not Spinning? Drum Won't Turn or Tumble — Belt, Rollers, Idler, Motor, Costs, Repair vs Replace (2026)
Quick answer
First, is the dryer actually starting? Maytag's "Not Tumbling or Spinning" and "Not Starting" articles, and its "How to Fix a Dryer That Won't Spin" guide, start with simple checks:
- Power: make sure it's plugged in fully. Electric dryers use two household fuses or breakers (gas dryers use one) and need 240 V. Reset a tripped breaker or replace a blown fuse.
- Door: it can look shut but not be latched. Push against both the top and bottom latch so each clicks. Make sure no clothing or packing material blocks the latch. An ERR code means the door isn't closed and latched.
- Control Lock: if the light is on, hold the Control Lock button for 3 seconds.
- Start: press and hold Start for 2–5 seconds. Touch panels need a dry fingertip, not a fingernail.
- Cycle: pick an Automatic Dry, AccuDry, or Time Dry cycle. The dryer won't start on Wrinkle Shield alone.
If you hear the motor but the drum doesn't turn, Maytag says it may be the dryer belt. If the drum is hard to move by hand, it may have seized. A loud, rumbling sound with no spin points to the drum rollers. If it stops mid-cycle, makes loud or squeaking noises, or won't start at all, the drive motor may need replacing. Maytag recommends a professional for belt, motor, and control board repairs, and says not to keep using a dryer that won't spin.
Warranty bonus: on Maytag appliances made after 2017, the drive motor and dryer drum have 10-year limited parts coverage. Check your purchase date before you pay for a motor.
Repair or replace? A belt, idler pulley, or rollers are cheap parts and usually worth fixing. A motor on an old dryer is the main "think about replacing" case, unless the 10-year parts warranty covers it.
Our partner pro call line is coming soon. Until then: if your appliance may still be under warranty, contact the manufacturer first. Otherwise, get two or three written quotes from local appliance repair companies, and ask about the diagnostic fee and the parts-and-labor warranty.
Verdict at a glance
| Your situation | What it usually means | Our verdict |
|---|---|---|
| Nothing happens, or the display shows ERR; Control Lock on; Start tapped not held; Wrinkle Shield selected; unplugged or one breaker tripped | Power, door, lock, cycle | ✅ Free fix. Plug in, reset breakers, latch both latches, unlock, hold Start |
| Motor runs but the drum spins freely by hand and doesn't turn on its own; rumbling or squealing before it stopped | Broken belt, worn idler pulley, worn rollers | 🔧 Usually worth repairing: cheap parts, about an hour of labor |
| Motor hums or stops mid-cycle; drum won't turn by hand even with the belt off; breaker trips when it starts; dryer is 10+ years old | Seized drum, rollers or bearing, failed motor, control board | 🔧 Repair if under about 8 years old, or if the 10-year motor/drum parts warranty applies; ♻️ lean toward replacing an old dryer that needs a motor |
Safety check before any DIY (30 seconds)
Stop and don't start the DIY steps below if any of these is true:
- You smell gas. Don't touch switches or plugs. Leave the house and call your gas utility from outside.
- You smell burning, see smoke or scorch marks, or the motor hums and gets hot. Unplug the dryer and leave it off. Maytag says not to keep using a dryer that's malfunctioning.
- The breaker trips every time you start it, or the cord or outlet is scorched. Leave it off and call an electrician (Maytag's advice when breaker or fuse problems continue).
- Unplug the dryer before you check terminal screws, the belt, or anything behind a panel (Maytag says unplug before checking terminal screws). On a gas dryer, close the gas valve before moving it.
- The dryer is still under warranty (year 1 parts and labor; motor and drum parts to year 10 on post-2017 models). Use Maytag service before you open any panels.
- Recall check: search your model on the CPSC recall site before paying for a repair.
If none of these apply, the free checks below are safe for most owners.
Fix order at a glance (cheapest first)
| Order | What to try | Cost | DIY tier |
|---|---|---|---|
| 1 | Plug in fully; reset both breakers (electric) or replace a blown fuse | Free | Easy |
| 2 | Latch the door (top and bottom latches); clear clothing from the latch | Free | Easy |
| 3 | Turn off Control Lock (hold 3 seconds); hold Start 2–5 seconds | Free | Easy |
| 4 | Choose an Automatic, AccuDry, or Time Dry cycle, not Wrinkle Shield alone | Free | Easy |
| 5 | Power-cycle: breakers off 5 minutes, on, start a Time Dry (Maytag's ERR step) | Free | Easy |
| 6 | Listen and hand-turn test: motor running? Drum loose or stiff? | Free | Easy |
| 7 | Check the warranty: motor and drum parts to year 10 on post-2017 models | Free | Easy |
| 8 | Check and replace the drive belt | Part only | Moderate |
| 9 | Replace the idler pulley (often with the belt) | Part only | Moderate |
| 10 | Replace drum support rollers (as a set), shafts, or front glides | Part only | Advanced |
| 11 | Door switch or thermal fuse (dryer won't run at all) | Part, or pro visit | Moderate |
| 12 | Drive motor or control board | Pro diagnosis first | Advanced |
DIY tiers: Easy (no panels off) · Moderate (a panel off, power off) · Advanced (drum out or wiring) · Pro only (gas, mains wiring, or still under warranty).
Which Maytag dryer do you have?
Find the model and serial number on the label inside the door opening or on the back of the dryer. You need it for the right belt length, roller kit, and idler, and to check the warranty.
| Type | Model prefix (examples) | Drum support (typical) | Notes |
|---|---|---|---|
| Electric | Usually MED (e.g. MED6230RH, MEDP586KW on Maytag's warranty page) | Rear rollers, front glides or rollers depending on the platform | 240 V, two breakers |
| Gas | Usually MGD (e.g. MGD6230RH, MGDP586KW) | Same | One breaker or fuse; gas valve must be open |
| Stacked laundry center / Commercial-style | Varies (check label) | Same | Harder access; consider a pro |
Prefixes are examples, not a full list. Maytag is a Whirlpool Corporation brand, so many parts share Whirlpool-family part numbers; your model's parts list shows the exact belt, idler, and roller kit.
Five-minute checks before you call anyone
- Is there power? If the drum light or controls don't light, it's a power problem first. Check the plug, then both breakers on an electric dryer; gas dryers use one. If breaker or fuse problems continue, Maytag says call an electrician.
- Latch the door. Push against both the top and bottom latch so each clicks into place. Look for a sock caught at the latch, or leftover packing tape on a new dryer.
- Unlock and hold Start. Control Lock light on? Hold Control Lock 3 seconds. Then hold Start 2–5 seconds. Dry your hands and the panel first.
- Check the cycle. Automatic Dry, AccuDry, or Time Dry. Not Wrinkle Shield alone.
- Power-cycle. Maytag's ERR step: breakers off for 5 minutes, back on, start a Time Dry, and watch for 5 minutes.
- Listen. Start it with the door closed. Motor running but no tumbling = belt (Maytag) or idler. Humming, no motor run = something jammed, or the motor (stop within seconds). Nothing at all = power, door, Control Lock, a switch, or a safety fuse.
- Hand-turn the drum (unplugged). Maytag says the drum shouldn't be difficult to move by hand; if it is, it may have seized. If it spins very easily and keeps going, the belt is likely broken (this "too easy" test comes from parts-retailer guides, not Maytag).
How to know it's fixed: a 10-minute Time Dry with a few towels tumbles the whole time, without rumbling, squealing, or stopping.
Maytag dryer codes and signs linked to "not spinning"
| Code / sign | Maytag's meaning | What to do |
|---|---|---|
| ERR | Door not completely closed and latched; the dryer won't run until it is | Latch both latches; power-cycle (breakers off 5 minutes), start Time Dry, monitor 5 minutes |
| Control Lock light | Controls won't respond | Hold Control Lock 3 seconds |
| No lights at all | No power (see Maytag's "No Power" articles) | Plug; both breakers or fuses; 240 V on electric |
| Motor runs, drum doesn't turn | Possibly the dryer belt (maytag.com) | Belt, then idler |
| Drum hard to move by hand | Drum may have seized (maytag.com) | Rollers, glides, bearing; pro diagnosis |
| Loud rumbling, no spin | Drum rollers malfunctioning; usually replaced as a set (maytag.com) | Rollers and shafts |
| Stops mid-cycle, loud or squeaking noise, or won't start | Drive motor may need replacing (maytag.com) | Pro; check the 10-year motor parts warranty |
| Starting or spinning issues, parts look fine | Electronic control board (maytag.com: professional help recommended) | Pro |
Code and sign meanings from Maytag's US Product Help and maytag.com articles (sources 1–4). Codes vary by model; your manual has the final list.
Diagnose by symptom → likely part
Before you touch parts: Unplug the dryer. On a gas model, close the gas valve. Belt and roller work usually means taking off the top or front panel and lifting the drum out; your model's tech sheet (often tucked inside the cabinet) shows the steps. Maytag recommends a professional for belt, motor, and control board repairs.
1. Motor runs, drum doesn't turn (spins freely by hand)
Likely causes: a broken drive belt (Maytag: wear and tear over time), or an idler pulley that has seized or broken and let the belt slip off.
Signs: you hear the motor and air movement but the drum sits still; the drum turns with almost no effort; a thump or squeal before it stopped.
DIY difficulty: Moderate (front or top panel off).
Tip: replace the idler pulley with the belt if the pulley wobbles, is grooved, or doesn't spin freely; a bad idler wears out a new belt. Some Maytag-family dryers also have a belt switch (Sears PartsDirect lists them); your tech sheet shows whether yours does.
| Part | What it does | DIY difficulty |
|---|---|---|
| Drive (drum) belt | Wraps the drum and turns it from the motor pulley | Moderate |
| Idler pulley | Keeps the belt tight | Moderate |
| Belt switch (some models) | Part of the belt circuit on some models | Moderate |
2. Drum is hard to turn, rumbles, or squeals
Likely causes: worn or seized drum support rollers or roller shafts, worn front glides, or a worn drum bearing.
Signs: stiff drum by hand (especially with the belt off); loud rumbling (Maytag's roller clue) or squealing for weeks before it stopped; the drum rubs or sits low.
DIY difficulty: Advanced (drum out). Maytag notes rollers are typically installed in sets, and all may need replacing at the same time.
| Part | What it does | DIY difficulty |
|---|---|---|
| Drum support rollers / shafts | Carry the back (and on some models the front) of the drum | Advanced |
| Drum front glides | Low-friction pads the front of the drum rides on | Advanced |
| Drum bearing | Supports the rear of the drum on some platforms | Advanced |
3. Motor hums, stops mid-cycle, or nothing runs at all
Likely causes: something jamming the drum or blower wheel, a failed drive motor, an open door switch, a blown thermal fuse on models where it's wired into the run circuit, or the electronic control board.
Signs: a hum with no rotation (stop within seconds); stops mid-cycle with a loud or squeaking noise; breaker trips on start; nothing happens even with both latches closed and Start held.
DIY difficulty: Moderate for the door switch and thermal fuse; Advanced for the motor; Pro for the control board (Maytag says not to attempt it yourself).
About the thermal fuse: HomeGuide notes a blocked vent typically causes a dryer's thermal fuse to blow, and a blown fuse can't be reset, only replaced. If yours blew, clean the vent first or the new one will blow too. Your model's wiring diagram shows whether the fuse stops the motor or only the heat.
About the motor and warranty: Maytag's 10-year limited parts warranty covers the dryer drive motor (part only after year 1) on appliances made after 2017. Have the model, serial number, and proof of purchase ready before you book.
| Part | What it does | DIY difficulty |
|---|---|---|
| Drive motor | Turns the belt and the blower | Advanced |
| Door switch | Tells the control the door is shut | Moderate |
| Thermal fuse | One-time safety cutoff on overheating | Moderate |
| Electronic control board | Sends power to the motor and other parts | Pro |
Hum, no spin, and you've checked the belt? A technician can test the motor, rollers, and switch circuit in one visit and tell you whether the dryer is worth fixing.
Partner pro call line coming soon. See “who services” below for your options.
Independent partner service, not Maytag. We may be paid when you call.
Can I keep using it until it's fixed?
No. Maytag says not to keep using a dryer that doesn't spin: tumbling moves air through wet clothes, and running a malfunctioning dryer can cause more damage. Hang-dry or use a laundromat until it's repaired.
Prevent it next time
- Don't overload. Fixr notes belts break under too much stress; HomeGuide says heavy loads and frequent use shorten belt life.
- Keep the vent clean. Maytag says to clean the house venting every one to two years, or sooner when drying slows. A blocked vent overheats the dryer and can blow the thermal fuse (HomeGuide).
- Act on new noises. Rumbling, thumping, and squealing are early signs of rollers, idler, or bearings; fixing them early is cheaper than a burned belt.
- Latch both door latches every load.
- Clean the lint screen every load.
Related guides: Maytag dryer not heating · Maytag dryer takes too long · Whirlpool dryer not spinning · Samsung dryer not spinning · Maytag washer not spinning · GE dryer not spinning · LG dryer not spinning · Frigidaire dryer not spinning · Maytag dryer not starting
What Maytag's warranty covers on a dryer
Per Maytag's US "10-Year Limited Parts Warranty" page (re-read 2026-10-30), for major appliances made after 2017:
| Period | What's covered | Who pays labor |
|---|---|---|
| Year 1 | All parts and labor for defects | Maytag |
| Years 2–10 | Limited parts on the dryer drive motor and dryer drum | You |
| Some models, longer | MED6230RH / MGD6230RH: labor also covered for the first 5 years (5-year limited parts and labor, plus 5-year limited parts on the drive motor and drum). MEDP586KW / MGDP586KW: all parts and labor for 5 years (single-family, non-commercial use) | Maytag, within those terms |
What this means for a dryer that won't spin: this is the one dryer problem where Maytag's long warranty often matters. A failed drive motor or a damaged drum is a covered part through year 10 on post-2017 models (you pay labor after year 1, unless your model has the 5-year terms above). Belts, idler pulleys, rollers, glides, switches, fuses, and the control board are not on the 10-year list; they're covered in year 1 (or the 5-year terms) only. Tripped breakers, an unlatched door, Control Lock, and Wrinkle Shield aren't defects. Maytag also says you can save on an extended service plan if you buy within 30 days of purchase. Keep your proof of purchase; Maytag Customer Service is 1-800-344-1274.
→ Maytag: 10-year limited parts warranty · Maytag Product Help
Before you pay for any repair: a 4-point check
- Warranty: year 1 parts and labor; motor and drum parts to year 10 (post-2017); 5-year terms on the models above; retailer or credit-card extended protection.
- Recalls: search your model at cpsc.gov/Recalls. A recall repair is free.
- Free fixes done: plug, both breakers, both latches, Control Lock, hold Start, cycle choice, power-cycle.
- Written quote: ask for part, labor, and trip fee as separate lines, whether the tech will replace the belt and idler together, and whether they'll check the rollers while the drum is out. If it's the motor, ask them to order it under warranty if your dryer qualifies.
What it costs: repair parts and pro service (2026)
How we price this table: DIY part prices are Whirlpool-family OEM part numbers (Maytag is a Whirlpool Corporation brand) listed on Sears PartsDirect public search pages for "maytag dryer …" searches (S-list under Sources), USD before tax and shipping; ranges span several part numbers because the right part depends on your model number. Other-brand and aftermarket parts in the same results were excluded. Pro costs tagged [GUIDE] come from two US cost guides (Fixr = G1, HomeGuide = G2): national averages for dryers in general unless noted, not Maytag-specific quotes. "Varies — get a quote" means neither guide itemizes that repair, so we don't show a number.
| Repair | Part cost (DIY) | Typical pro cost (parts + labor) | Notes |
|---|---|---|---|
| Plug, breakers, latches, lock, Start, cycle, power-cycle | $0 | — | Do these first |
| Drive belt | $9.72–$78.72 (WP40111201 to WPW10112954) [S1] | [GUIDE] belt repair $100–$200, replacement $150–$250 (G1); belt replacement $100–$250 (G2) | Most common "motor runs, no spin" fix |
| Belt switch (some models) | $25.18–$28.44 (W10847984, WPW10411937) [S1] | Varies — get a quote (not itemized in G1/G2) | Only if your model has one |
| Idler pulley / idler assembly | $4.39–$94.39 (WP691362 to WPW10344193) [S2] | [GUIDE] pulley replacement $200–$350 (G2) | Often replaced with the belt |
| Drum support rollers / shafts | Rollers $12.02–$46.55 (WPW10314173 to WP40113601; kit WPW10177428 $63.50); shafts $34.33–$57.68 (WPW10359272 to WP53-0197) [S3] | [GUIDE] roller repair $50–$100, replacement $100–$150 (G1); roller $100–$300 (G2) | Replace as a set |
| Drum front glides | $48.25–$101.56 (WP31001469, WP31001470) [S4] | Varies — get a quote (not itemized in G1/G2) | Model-specific |
| Drum bearing | — | [GUIDE] bearing repair $75–$150, replacement $100–$250 (G1); bearing $100–$300 (G2) | On platforms with a rear bearing |
| Door switch | $21.62–$131.35 (W11551763 to WP8182530) [S5] | [GUIDE] door switch $50–$150 (G1); door / switch $80–$200 (G2) | |
| Thermal fuse | $12.99–$110.38 (W11050897 kit to W10154212 kit) [S6] | [GUIDE] thermal fuse $75–$150 (G2) | Clean the vent first |
| Drive motor | $86.38–$385.43 (279827 to WP8182472) [S7] | [GUIDE] motor repair $150–$250, replacement $250–$450 (G1); motor $150–$400 (G2) | Part covered years 2–10 on post-2017 Maytag models |
| Drum replacement | — | [GUIDE] drum repair $150–$500, replacement $300–$450 (G1); $200–$500 (G2) | Drum part covered years 2–10 on post-2017 models |
| Maytag dryer repair (brand range) | — | [GUIDE] Maytag $100–$550 (G1, brand-specific, all repair types) | |
| Service call / diagnostic fee | — | [GUIDE] service fee $50–$80, labor $50–$100 per hour (G1); $70–$130 minimum service fee, $50–$125 per hour (G2) | |
| New comparable dryer | — | [GUIDE] $600–$1,500 (G1); $800–$1,200 unit (G2); all brands |
Part prices checked 2026-10-30 on Sears PartsDirect public search pages (S1–S7). Pro-cost cells tagged [GUIDE] from G1 (Fixr) and G2 (HomeGuide), re-read 2026-10-30; [GUIDE] figures are national averages, not Maytag-specific quotes except where marked. Prices change; confirm with your model number.
Tip: if the drum is already out for a belt, ask for a price to do the idler and rollers at the same time; the labor is mostly the same.
Repair vs. replace calculator
1. What's the all-in repair cost? → R = trip/diagnostic fee + part + labor + tax, minus anything Maytag's warranty (or a recall) covers, such as a motor or drum part in years 2–10
2. What does a comparable new dryer cost, all-in? → N = unit + delivery + installation + haul-away (+ new cord or vent kit)
3. How old is your dryer, and how long should it last? → Age and Life (use about 10 years, inside Fixr's 8–12-year and HomeGuide's 8–13-year ranges, if you don't know)
4. How much have you spent on repairs in the last 2 years? → Past
Step A — Cost ratio: R ÷ N
Step B — Life used: Age ÷ Life
Step C — Repeat-repair check: (R + Past) ÷ N
| Life used under 50% | Life used over 50% | |
|---|---|---|
| Repair under 50% of new | ✅ Repair | 🤔 Repair is usually fine. Check for other wear |
| Repair over 50% of new | 🤔 Get a second quote first | ❌ Replace |
Repeat-repair rule: if Step C is over 50%, lean toward replacing. If the part is no longer available for your model, replace.
Worked example 1 (illustrative numbers): A 2-year-old Maytag electric dryer won't start. The bottom door latch hadn't caught; pushing both latches shut fixed it. R = $0.
→ Not a repair.
Worked example 2 (illustrative numbers): A 6-year-old Maytag dryer (made after 2017) hums and stops; the tech confirms a failed drive motor. The motor part is covered under the 10-year parts warranty, so you pay only the trip fee and labor: R = $200; N = $900.
200 ÷ 900 = 22%; life used 6 ÷ 10 = 60%; repeat check 22% → Repair.
Worked example 3 (illustrative numbers): A 12-year-old Maytag dryer (made before the 10-year warranty) won't spin; the tech finds a failed motor and worn rollers: R = $480; N = $800. It had a $180 thermostat last year.
480 ÷ 800 = 60%; life used 12 ÷ 10 = 120%; repeat check (480 + 180) ÷ 800 = 83% → Replace.
Tips toward replacing: a motor on an out-of-warranty dryer past about 10 years, a cracked drum out of coverage, repeated repairs, or parts no longer available.
Tips toward repairing: it's a belt, idler, rollers, a switch, or a fuse; the dryer is under about 8 years old; it's in year 1; or the motor or drum part is under the 10-year warranty.
Why 50%? It's the common rule of thumb, and the one we use. Some technician checklists draw the line a little higher, at about 60% of a new dryer's price, so treat a repair that costs 50–60% of new as a second-quote zone, not an automatic replace. The older the dryer, the lower the line should go.
Who services Maytag dryers near you
1. Maytag (warranty or authorized service). In year 1, or for a motor or drum part within 10 years on a post-2017 model, start with Maytag. Maytag says you can schedule a Maytag authorized service appointment.
→ Maytag Product Help: schedule service · 1-800-344-1274
2. A partner appliance pro (out of warranty).
Our call line connects you with an independent appliance repair provider in your area. Tell them whether the motor runs, whether the drum turns easily, stiffly, or not at all by hand, any noise before it stopped, and your model number.
Our partner pro call line is coming soon. Until then: if your appliance may still be under warranty, contact the manufacturer first. Otherwise, get two or three written quotes from local appliance repair companies, and ask about the diagnostic fee and the parts-and-labor warranty.
3. An electrician. If a breaker keeps tripping, the outlet or cord is scorched, or you don't have 240 V at an electric dryer.
4. DIY with the right part. Belts, idlers, and rollers are common DIY jobs with the tech sheet, though Maytag recommends a professional for belts. Order by your exact model number.
Questions to ask any technician:
- Did you check the breakers, both latches, and Control Lock first?
- Is it the belt, idler, rollers, or motor? How did you confirm it?
- Will you replace the idler with the belt and check the rollers while the drum is out?
- Is the motor or drum covered by Maytag's 10-year parts warranty on my model?
- Can you split the quote into part, labor, and trip fee?
Optional: is an appliance warranty worth it?
A home warranty (service contract) can cover repairs for a yearly fee plus a per-visit service fee. Read the exclusions carefully: many plans cap appliance payouts, and a dryer that's already broken is usually not covered. Compare any plan with Maytag's own 10-year motor and drum parts coverage first.
FAQ
Why is my Maytag dryer not spinning?
First rule out the simple causes Maytag lists: plugged in, breaker on, both door latches clicked, Control Lock off, Start held 2 to 5 seconds, and an Automatic, AccuDry, or Time Dry cycle selected. If the motor runs but the drum doesn't turn, Maytag says the dryer belt may be the problem.
My Maytag dryer runs but the drum doesn't turn. What is it?
Usually the drive belt, sometimes with a failed idler pulley that let it slip off. Maytag says a motor running with no spin may be a belt issue.
Why is my Maytag dryer drum hard to turn by hand?
Maytag says the drum may have seized. Worn rollers, roller shafts, glides, or a drum bearing are the usual parts; a pro should diagnose it.
Why does my Maytag dryer rumble and not spin?
Maytag says a loud rumbling sound with no spin can mean the drum rollers are failing. Rollers are usually replaced as a set.
What does ERR mean on a Maytag dryer?
Maytag says the door isn't completely closed and latched. Push both latches shut, then turn the breakers off for 5 minutes, back on, start a Time Dry, and watch for 5 minutes.
Is the motor covered by Maytag's warranty?
On Maytag appliances made after 2017, the dryer drive motor and drum have 10-year limited parts coverage. After year 1 you pay labor unless your model has longer terms.
How much does it cost to fix a Maytag dryer that won't spin?
Fixr puts belt replacement at $150 to $250 and HomeGuide at $100 to $250. When we checked Sears PartsDirect on 2026-10-30, Maytag-family dryer belts were listed at about $10 to $79.
Can I keep using my Maytag dryer if it doesn't spin?
No. Maytag says not to keep using a dryer that doesn't spin, because tumbling circulates air and a malfunctioning dryer can be damaged further.
About the author
Fix It or Replace editorial team — We research appliance repairs using manufacturer documentation, parts-supplier data, and current US cost guides, and we cite every source below. We are not appliance technicians; for anything involving gas, wiring, or mains power, call a qualified pro.
Last updated: 2026-10-30.
Sources
- Maytag Product Help (US): "Not Tumbling or Spinning - Dryer" (power: drum light or controls not lighting, see No Power; hold Start, Push to Start, or Hold to Start 2–5 seconds; fingertip, dry panel; 240 V for electric; power cord installation and terminal screws, unplug first). https://producthelp.maytag.com/Laundry/Dryers/Dryer/Operation/Not_Starting/Not_Tumbling_or_Spinning_-_Dryer (accessed 2026-10-30)
- Maytag Product Help (US): "Not Starting or Not Operating - Dryer" (Control Lock, hold 3 seconds; hold Start 2–5 seconds; door latched, upper and lower latches; packing or clothing blocking the latch; Automatic Dry, AccuDry, or Time Dry, won't start on Wrinkle Shield), "No Power - Electric Dryer" (two household fuses or breakers; call an electrician if it continues; 240 V; 3- and 4-wire cord; terminal screws, unplug first), and "No Power - Gas Dryer" (breaker or fuse). https://producthelp.maytag.com/Laundry/Dryers/Dryer/Operation/Not_Starting/Not_Starting_or_Not_Operating_-_Dryer · https://producthelp.maytag.com/Laundry/Dryers/Dryer/Operation/Not_Starting/No_Power_-_Electric_Dryer · https://producthelp.maytag.com/Laundry/Dryers/Dryer/Operation/Not_Starting/No_Power_-_Gas_Dryer (accessed 2026-10-30)
- Maytag Product Help (US): "ERR - Error Code - Dryer" (door not completely closed and latched; upper and lower latches; breakers off 5 minutes, on, Time Dry, monitor 5 minutes; customer service 1-800-344-1274; extended service plan savings within 30 days). https://producthelp.maytag.com/Laundry/Dryers/Dryer/Error_Codes/Other_Error_Codes/ERR_-_Error_Code_-_Dryer (accessed 2026-10-30)
- Maytag (maytag.com): "How to Fix a Dryer That Won't Spin" (unplugged dryer; 240 V and 3- or 4-wire cord; broken belt, motor running but not spinning, call a professional; drive motor: stops mid-cycle, loud or squeaking noise, or fails to start, professional recommended; seized drum, difficult to move by hand; drum rollers, loud rumbling, installed in sets; breaker; top and bottom latch; electronic control board, not recommended for users; Control Lock; don't keep using a dryer that doesn't spin; Maytag authorized service). https://www.maytag.com/blog/washers-and-dryers/how-to-fix-a-dryer-that-wont-spin.html (accessed 2026-10-30)
- Maytag US: "Maytag 10-Year Limited Parts Warranty" (major appliances made after 2017; all parts and labor in year one; washers and dryers: drive motor, wash basket, dryer drum; MED6230RH and MGD6230RH labor covered for the first 5 years; MEDP586KW and MGDP586KW all parts and labor for 5 years, single-family non-commercial use; extended service plan savings within 30 days). https://www.maytag.com/services/limited-10-year-warranty.html (accessed 2026-10-30)
- Maytag Product Help (US): "Long Dry Times - Dryer" (house venting cleaned every one to two years or as needed). https://producthelp.maytag.com/Laundry/Dryers/Dryer/Drying_Performance/Long_Dry_Times_-_Dryer (accessed 2026-10-30)
- Repair Clinic (parts retailer, not Maytag): "Maytag Dryer Drum Not Turning" (hand-turn test, a drum that spins very easily suggests a broken belt; rollers and axles; blower wheel; idler; timer rare). Used only to label the hand-turn test as retailer guidance. https://www.repairclinic.com/RepairHelp/How-To-Fix-A-Dryer/4-4--/Maytag-Dryer-Drum-Not-Turning (accessed 2026-10-30)
- U.S. Consumer Product Safety Commission: recalls search. https://www.cpsc.gov/Recalls (accessed 2026-10-30)
- Federal Trade Commission: endorsement and affiliate disclosure guidance. https://www.ftc.gov/business-guidance/resources/ftcs-endorsement-guides-what-people-are-asking
- Part prices: Sears PartsDirect public search pages, see S-list below (accessed 2026-10-30).
- Repair cost guides: Fixr (G1) and HomeGuide (G2), see list below (accessed 2026-10-30).
Part price sources (Sears PartsDirect public search results, USD, accessed 2026-10-30; Whirlpool-family part numbers only; prices change, confirm with your model number):
- S1. Search "maytag dryer belt": drum belts WP40111201 $9.72, 341241 $10.01, 661570V $16.20, WPY312959 $23.12, WPW10131172 $29.79, WPW10198086 $38.30, W11628798 $43.07, WP8547168 $51.10, WPW10136934 $54.29, W10849499 $57.96, W11162091 $58.09, WPW10112954 $78.72; belt switches W10847984 $25.18, WPW10411937 $28.44 (blower belt and switch lever excluded). https://www.searspartsdirect.com/search?q=maytag%20dryer%20belt
- S2. Search "maytag dryer idler pulley": WP691362 $4.39, WP6-3037050 $20.72, W10837240 $21.70, WPW10547292 $26.01, WP31001344 $42.09, 8547174V $44.53, idler assembly WPW10344192 $65.09, idler assembly WP53-2366 $70.76, WPW10344193 $94.39 (idler arms, motor pulleys, and motor excluded). https://www.searspartsdirect.com/search?q=maytag%20dryer%20idler%20pulley
- S3. Searches "maytag dryer drum roller" and "maytag dryer drum support roller": rollers WPW10314173 $12.02, WP37001042 $17.49, 12001541 $30.25, WP40113601 $46.55, kit WPW10177428 $63.50; shafts WPW10359272 $34.33, WPW10359271 $35.44, WPW10359269 $40.46, WPW10359270 $46.85, WP53-0197 $57.68 (Samsung, GE, LG, and brackets excluded). https://www.searspartsdirect.com/search?q=maytag%20dryer%20drum%20roller · https://www.searspartsdirect.com/search?q=maytag%20dryer%20drum%20support%20roller
- S4. Search "maytag dryer drum glide": front glides WP31001469 $48.25, WP31001470 $101.56; glide bracket WP37001036 $43.70 (GE, Samsung, Frigidaire, aftermarket kits, and W10119103 at $306.45 excluded pending a model check). https://www.searspartsdirect.com/search?q=maytag%20dryer%20drum%20glide
- S5. Search "maytag dryer door switch": W11551763 $21.62, W10169313 $21.92, WP3406107 $27.11, WP3406105 $35.85, WPW10237959 $36.95, WP3391902 $40.55, W11177687 $40.93, WPW10350910 $41.39, W11036551 $45.80, W11168374 $47.01, W11427601 $81.02, WP8182530 $131.35 (adjustment part excluded). https://www.searspartsdirect.com/search?q=maytag%20dryer%20door%20switch
- S6. Search "maytag dryer thermal fuse": W11050897 kit $12.99, WP40113801 $15.08, WP3390719 $19.10, WP3399849 $22.70, WP306604 $26.84, WP3403607 $32.93, WP307473 $45.44, WP53-1182 $45.78, 279973 kit $46.20, WP8572767 $49.17, WP33001762 $49.40, 279816 kit $54.05, WP8573713 $57.25, W11034847 kit $62.90, W10900067 kit $63.02, W10169881 kit $68.90, W10154212 kit $110.38 (aftermarket limiter and kit excluded). https://www.searspartsdirect.com/search?q=maytag%20dryer%20thermal%20fuse
- S7. Search "maytag dryer drive motor": 279827 $86.38, W10410997 $114.97, 279787 motor and pulley $188.90, W10841144 assembly $190.50, WPW10448896 $201.96, WPW10508324 $214.67, WPW10463866 $214.91, W10416573 $231.77, W10416574 motor and pulley $244.21, W10197708 $346.61, WP8182472 $385.43. https://www.searspartsdirect.com/search?q=maytag%20dryer%20drive%20motor
Pro-cost guide sources [GUIDE] (US national averages, parts + labor, not brand-specific quotes unless noted; the guide pages carry 2024–2025 dates, so local quotes may differ):
- G1. Fixr, "How much does it cost to repair a dryer?" (updated January 31, 2025): repair table: roller $50–$100, door $50–$125, bearing $75–$150, belt $100–$200, motor $150–$250, drum $150–$500; replacement table: door switch $50–$150, roller $100–$150, bearing $100–$250, belt $150–$250, motor $250–$450, drum $300–$450; belts break under too much stress; brand table: Maytag $100–$550; service fee $50–$80, labor $50–$100 per hour; dryers last 8–12 years; new dryer $600–$1,500. https://www.fixr.com/costs/dryer-repair (accessed 2026-10-30)
- G2. HomeGuide, "How Much Does Dryer Repair Cost? (2026)" (byline November 14, 2024): belt $100–$250 (heavy loads and frequent use shorten belt life); thermal fuse $75–$150 (can't be reset; a blocked vent typically blows it); motor $150–$400; roller $100–$300; drum $200–$500; pulley $200–$350; bearing $100–$300; door / switch $80–$200; minimum service fee $70–$130, $50–$125 per hour; new dryer $800–$1,200 (unit); dryers last 8–13 years on average. https://homeguide.com/costs/dryer-repair-cost (accessed 2026-10-30)
Disclosure
Fix It or Replace is an independent site. We are not affiliated with, endorsed by, or sponsored by Maytag or Whirlpool Corporation. "Maytag", "Wrinkle Shield", and "AccuDry" are trademarks of their owners and are used here only to describe the products we cover.
- Affiliate links: Some part links go to retailers such as PartSelect and RepairClinic. If you buy through them, we may earn a commission at no extra cost to you.
- Call line: Phone numbers labeled "partner pro" are operated by a third-party lead service that routes your call to an independent repair provider in your area. We may be paid for calls. We don't employ the technicians, and we don't guarantee their work, pricing, or availability. Confirm licensing, insurance, and quotes directly with the provider.
- Prices are estimates and change often. Always get a written quote.
- Safety: Unplug the dryer (and close the gas valve on gas models) before removing any panel. If you're unsure, call a qualified professional.
We don't publish fake reviews or testimonials, and we never present a tracking phone number as a specific local business.